top of page

What Does Mold Remediation Involve? A Step-by-Step Guide for DFW Homeowners

Meir Manor
2 days ago
2 min read

If mold was found in your home, the next question is what happens now. Mold remediation in Texas follows a set process, and knowing the steps helps you understand your estimate, your schedule and what to expect while the work is going on.

Mold remediation work by Ori-Builders in Dallas-Fort Worth

Step 1: Find and fix the water source

Mold grows where there's water. Whether it's a leaking shower pan, a slow pipe leak, an AC drain line or a roof leak, the source has to be fixed first. Otherwise, the mold comes back.


Step 2: The remediation protocol

In Texas, when the mold area is 25 contiguous square feet or more, the work follows a written mold remediation protocol prepared by an independent licensed Mold Assessment Consultant. The protocol says what has to be removed, how the area must be contained and what has to pass at the end. The company that removes the mold can't be the one that tested it, so the consultant is always a separate company.


Step 3: Containment

Before any material is removed, the work area is sealed off with plastic sheeting and zipper doors. Air machines with HEPA filters keep the area under negative pressure, so air flows into the work area and not out into the rest of your home.


Step 4: Removal

Moldy drywall, insulation, carpet pad and other materials that can't be cleaned are cut out, bagged inside the containment and taken out of the home. Wood framing that can be saved is cleaned and treated.


Step 5: Cleaning and drying

Every surface inside the containment is HEPA vacuumed and wiped down. A moisture meter confirms the framing is dry before anything is closed up.


Step 6: Clearance

After the work, the independent Mold Assessment Consultant comes back to inspect and test the area. The containment stays up until the area passes. Once it does, the remediation company issues a Certificate of Mold Damage Remediation, a document worth keeping for your records and for when you sell the home.


Step 7: Rebuild

This is where many homeowners get stuck: one company removes the mold, then they have to find someone else to put the room back together. Ori-Builders is a general contractor, so we rebuild the same space ourselves: drywall, insulation, paint, flooring, cabinets, tile and trim.


How long does it take?

Small jobs can be finished in a few days. Larger jobs take longer, depending on how much material comes out, how long drying takes and the size of the rebuild. You get a schedule with your estimate.


Why Ori-Builders

Ori-Builders is a licensed Texas mold remediation company (TDLR license RCO1808), and our owner holds a mold remediation contractor license (MRC2177). With 30+ years of construction experience, we handle remediation and the rebuild under one roof, so you deal with one company from start to finish.

We serve Dallas-Fort Worth. See our pages for mold remediation in Dallas, Plano, Richardson, Frisco and McKinney.


Mold found in your home? Call 469-331-8664 for a free estimate.


 
 
 

Comments


bottom of page